3R AMI

The group of 3R AMI products is designed for an automatic identification, sorting, or an incoming/outgoing inspection of products or of their material properties. Advantages: fast, non-destructive, highly sensitive and reliable, unlimited number of sorting groups, easy and user-friendly operation...
The 3R AMI system is designed for an automatic identification, sorting, or an incoming/outgoing inspection of products or of their material properties.
Advantages
Quickness - measuring usually takes less than 1 second; even shorter measuring time is possible.
Non-destructiveness - Thanks to 3R AMI a 100 percent incoming and outgoing inspection of material type can be performed also in situations where it had not been possible or where it had been too expensive.
Sensitivity and reliability - The usage of a multi-frequency eddy-current measuring method together with special mathematical models and highly efficient algorithms ensures high sensitivity and reliability.
Simplicity and user-friendliness - Simplicity was one of the important aspects which were taken into account during the development of the 3R AMI software. Among its key features are unlimited number of groups and their automatic setting. The aim is to achieve reliable results even with a small number of calibration samples and without the need of a previous training or any special sample preparation. This all should be fast and non-destructive.
Principle - a multi-frequency eddy-current measuring method is used for data acquisition. The method is suitable with all electrically conductive and/or magnetic materials. The collected measured data are automatically processed with integrated mathematical models and algorithms.
Hardware - the 3R AMI system was developed by 3R Technics specifically for the eddy current device MAGNATEST® D from the Foerster Company . The software enables an automatic material identification.
Applications - Both static and dynamic measurements are possible. The tested material can be of various shapes: from plates and strips of sheet metal through wires, rods and pipes to various profiles and parts.